PRODUCT
INFORMATION
711
711

CLEAR ORTHOTIC SHOE ADHESIVE

711 is a clear adhesive especially formulated for use in fabricating orthotic insoles and for the manufacture and repair of shoes.
711 can be used on a variety of substrates including, polypropylene, SBR, PPR, EVA and cushion crepe. Use 711 when a clear adhesive is necessary. Its adhesion and clarity make 711 unique. This product must be heat activated.
  1. Excellent room temperature contactability
  2. Fast drying
  3. Dries clear
  4. High heat resistance
Composition 711 is made with a blend of flammable solvents, SBR rubber and high tack resins.
Appearance Clear
Viscosity 200 to 400 cps
Solids Content 31 to 34%
Solvents Use our special "341 Solvent Blend" for best results to clean-up and thin. Toluene may also be used for clean-up.
Storability 6 months
Weight per Gallon 7.0 ± 0.5 #/gallon
Application techniques Apply to both sides of substrate. May be sprayed, brushed or rolled. Must be heat activated.
5 gallon pails or 55 gallon drums
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Adhesives and Chemicals shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.
ADHESIVES AND CHEMICALS, INC.
131 Brown St. Yatesville, PA 18640
Phone: 570-654-6735
Fax: 570-654-0676

Click here to return to A&C homepage.