 |
PA-311
NON-FLAMMABLE, WATER BASE, LAGGING ADHESIVE
This is a non-flammable, water base, black, lagging adhesive for brush application. It is used to seal the edges of fiberglass insulation batts, to minimize air loss and prevent fiberglass particles from becoming airborne.
|
 |
- SEALING EDGES OF FIBERGLASS INSULATION USED IN HVAC DUCTS.
- BONDING FIBERGLASS INSULATION TO THE EXTERIOR OF SHEET METAL DUCTS TO FORM A STIFF EDGE.
- BONDING FELT OR OTHER FIBROUS MATERIALS TO METAL, WOOD AND SHEET ROCK.
- FOR USE IN FIRE HAZARD AREAS.
|
 |
- Safe to use in fire hazard areas.
- Dries to water resistant film.
- Good adhesion to metal, fiberglass, wood, paper or cloth.
- Non-flammable, no unpleasant odors or hazardous fumes. Safe to use in enclosed areas.
- Easy brushing, non-dripping.
|
 |
| Composition |
Ready to use, non-flammable, water base adhesive. |
| Color |
Black |
| Viscosity |
Heavy brush, 12,000 to 14,000 cps |
| Solids Content |
58% ± 2% |
| Time to tack |
5 to 20 minutes |
| Solvents |
Clean up when wet with warm water. Dry clean up with aromatic solvents. |
| Storability |
Keep from freezing. Store and ship at temperatures above 32°F. Pigment settles on standing; stir thoroughly before each use. Use within 6 months after receipt. |
| Weight per Gallon |
9.0 #/gallon |
| Service Temperature |
0°F to 150°F |
| Flammability |
Non-flammable when wet. |
| Application and Storage |
50°F to 100°F |
| Application techniques |
Apply with heavy brush. Clean brush, hands and wipe spills with soap and water. |
|
 |
1 gallon cans
5 gallon pails
55 gallon drums |
 |
NOT RECOMMENDED FOR OUTDOOR USE
Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material. |