PRODUCT
INFORMATION
PA-106





PA-106

SPRAYABLE NON-FLAMMABLE INSULATION ADHESIVE


A non-flammable spray adhesive used for bonding fiberglass insulation to sheet metal. This is a chlorinated solvent based adhesive containing methylene chloride. This high performance product provides excellent coverage and adhesion.
  1. BONDING FIBERGLASS INSULATION TO THE INTERIOR OF SHEET METAL DUCTS.
  2. BONDING FIBERGLASS INSULATION TO OTHER RIGID MATERIALS SUCH AS THE INTERIOR OF TRUCKS, RAILROAD CARS.
  3. BONDING ALUMINUM FOIL, PAPER OR VINYL FILM TO FIBERGLASS INSULATION.
  4. BONDS TO A WIDE VARIETY OF SURFACES.
  5. USED FOR BONDING AND SPLICING ON POROUS AND NON-POROUS SURFACES.
  1. Provides a spray that is non-flammable in the wet state.
  2. Provides excellent sprayability.
  3. Easy spraying in simple equipment at low pressure.
  4. Fast drying with quick development of tack.
  5. Adhesive remains tacky after completely dry.
  6. Good coverage from smooth spray pattern.
  7. Sets up quickly when sprayed on vertical surfaces and does not sag, drip, or run.
Composition PA-106 is a versatile adhesive for spray application. PA-106 is advantageous to use in many industrial areas because it is non-flammable when wet and it dries very rapidly.
Color Blue or clear
Viscosity 2000 cps 500 cps
Solids Content 20% 1%
Solvents Clean-up with methylene chloride
Storability 6 months
Weight per Gallon 10.4 0.1 #/gallon
Service Temperature 0F to 180F
Flammability Wet - Non-flammable. Dry - Slow burning.
Application and Storage 50F to 100F
Application techniques Sprayable.
May also be applied with a brush or roller.
1 gallon cans
5 gallon pails
55 gallon drums
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.
PRECISION ADHESIVES, INC.
51 Washington St., PO Box 910, Perth Amboy, NJ 08861
Phone: 800-456-3021
Fax: 732-442-9568

Click here to return to HVAC product list.